Articles

How to Pump Gas : How to Use a Gas Pump

August 20, 2019


Hi! This is Dan Wolstenholme on behalf of
Expert Village and I am going to show you how to pump gas. Okay in this scene we are
going to pull the car up to the pump and start to pump the gas. So we are going to show you
how to activate the pump, how to insert the nozzle and how to start pumping gas. First
thing when you pull up to the pump is to always remember to shut off your engine for safety
reasons. Okay and we get out of the car. As we showed you before, always remember to release
your fuel pump, shut the car door and open the gas cap. Now for some of you who don’t
like to experience everybody else’s used the gas pump before you that day, you can always
use a rubber glove for your sanitization protection. Okay we are at the pump. What we want to do
first is to authorize the pump. This particular one is asking if we have a discount ticket.
We don’t so press no. We are going to pay with the debit card outside. So we are going
to insert the card into the card reader. Always remember to use for gasoline the black handle,
the green handle over here is for diesel fuel. Believe it or not, people have put diesel
in their car. So you want to take a look at the fuel receptacle. It is the nozzle there
again. A standard gasoline nozzle is made to fit right into that hole so we go ahead
and do that now. We are going to select a grade which is 85 and then we are going to
insert the nozzle and start to pump. If you noticed it has a little trigger here that
we could profit on to automatically fill and then we go ahead and fill or dispense to the
level that we want to. When the tank is full, the back pressure will kick back into the
nozzle. To release the pressure on the nozzle, you will hear click and that means that the
tank is full.

Leave a Reply

Your email address will not be published. Required fields are marked *